Compound tube filling and sealing machine maintenance attention to detail explained

   The whole machine of compound tube filling and sealing machine is made of high quality stainless steel for contacting materials and some related parts, and the parts that need to be cleaned are selected with quick-change devices, which are easy to disassemble and clean. Where some materials need heating type heat preservation, its barrel external heating thermostat device can be added. Where plastic and composite tubes are used as packaging materials, the machine can be used with confidence. It is the best product for cosmetic industry, pharmaceutical industry, adhesive industry, shoe polish industry and other related industries.

　　The compound tube filling and sealing machine can smoothly and accurately inject various paste, paste, viscosity fluid and other materials into the tube, and then complete the heating of the hot air inside the tube, sealing the end and marking the batch number and production date. Filling and sealing machine is widely used in the pharmaceutical, food, cosmetics, daily chemical products and other industries of large diameter plastic tube, composite tube filling and sealing, is the ideal practical and economic filling equipment.

　　The product features of compound tube filling and sealing machine:

　　◆High-grade liquid crystal display programming controller and button combined with the operation screen, fully grasp the stepless speed regulation, parameter equipment, output counting statistics, air pressure indication, fault display and other operating conditions of the equipment, so that the operation is simple and humane.

　　◆Manually put the material to be filled into the feeding bin, and then the filling and sealing can be completed automatically.

　　◆High-precision alignment system reduces the range of color difference between the tube body and the color mark.

　　◆The adjustment part is external and the position is digitally displayed, so the adjustment is quick and accurate (suitable for multi-specification and multi-variety production).

　　Compound tube filling and sealing machine maintenance details of attention to explain.

　　1、All lubricating parts should be filled with enough lubricant to prevent wear of machine parts.

　　2, in the process of operation, the operator should standardize the operation, do not allow hands to touch each part of the machine tool is running, to avoid causing personal injury accidents. If an abnormal sound is detected, the machine should be stopped in time to check until the cause is identified, and only after troubleshooting can the machine be turned on again.

　　3、Each time before starting production, the oil mist must be added to the machine oil (including the feed unit)

　　4、Discharge the water in the pressure reducing valve after shutting down the machine at the end of each production (including the feeding unit)

　　5、The inside and outside of the filling machine will be clean, it is strictly forbidden to clean it with hot water higher than 45℃ to avoid damaging the sealing ring.

　　6、After each production, clean the machine and turn off the main power switch or unplug the power supply.

　　7、Check the sensitivity of the sensor regularly

　　8、Tighten the connection parts.

　　9、Check the electric control line and each sensor connection and fasten.

　　10、Check and test whether the motor, heating system, PLC and inverter are normal, and clean and test whether the coefficient parameters are normal.

　　11、Check whether the pneumatic and transmission mechanism is good, and do a good job to adjust and change the lubricant.

　　12、Equipment maintenance items are handled by the operator and make maintenance records.